Icom IC-228A is a well-built 2 meter FM mobile transceiver providing 25 watts of power. There is also a setting for 5 watts output when less power is needed. The multi-colored backlit LCD display is readable over a wide range of light. This radio has 20 memories and priority watch. It also has programmed scanning or memory scanning. This radio requires 13.8 VDC at 6.0 amps.
- The Icom IC-228H is the same as the IC-228A, but transmits with 45 watts (instead of 25 watts) and requires 9.5 amps.
- The Icom IC-1201A is the similar to the IC-228A, but operates on the 1200 MHz band (with 10 watts) instead of 2 meters
Type: | Amateur VHF transceiver | ||
Frequency range: | TX: 140.1-150 MHz RX: 138-174 MHz |
||
Tuning steps: | 5 / 10 / 15 / 20 / 25 KHz | ||
Mode: | FM | ||
Channels/memory management: | 20 regular 1 call 2 scan edge Lithium battery backup |
||
Repeater shift/offset: | +/- 600 KHz | ||
Power supply: | 13.8 VDC ±15% | ||
Current drain/power consumption: | RX: 450-800 mA TX: 3-6 A |
||
Antenna impedance/connector: | 50 ohms / SO-239 on pigtail | ||
Dimensions (W*H*D): | 140*50*137 mm (5.5*2*5.4") | ||
Weight: | 850 gr (1.9 lbs) | ||
Other features: | Built-in CTCSS/PL encoder, Dimmer | ||
RECEIVER SECTION | |||
Receiver system: | Double conversion superheterodyne 1st IF: 17.2 MHz 2nd IF: 455 KHz |
||
Sensitivity: | 0.18 uV (12 dB SINAD) | ||
Selectivity: | 15 KHz (-6 dB) 30 KHz (-60 dB) |
||
Image rejection: | |||
AF output power/speaker: | 2.4 W at 10% distortion / 8 ohms | ||
External speaker connector: | 3.5 mm | ||
TRANSMITTER SECTION | |||
RF output power: | Hi: 25 W Lo: 5 W |
||
Modulation system: | Variable reactance | ||
Max FM deviation: | ±5 KHz | ||
Spurious emissions: | Less than -60 dB | ||
Microphone connector/impedance: | 8-pin / 600 ohms | ||
MISCELLANEOUS | |||
Manufactured: | Japan, 1988-1990 (Discontinued) | ||
Additional info: | |||
Related documents: | User manual (3.5 MB) | ||
Modifications: | |||
Options/Accessories: |
|
Yorum Yapmak İsteyebilirsiniz