Icom IC-229A is a 2 meter FM mobile transceiver providing 25 watts of power. There is also a setting for 10, 5 or 1 watts output when less power is needed. The LCD display is easy to read. This radio has 20 memories and priority watch. It also has programmed scanning or memory scanning. This radio requires 13.8 VDC at 6.0 amps. Includes hand mic and OPC-044B power cable. 5.5 x 1.6 x 4.1 inches 1.7 lbs.
| Type: | Amateur VHF transceiver | ||
| Frequency range: | TX: 144-148 MHz RX: 136-174 MHz |
||
| Tuning steps: | 5 / 10 / 12.5 / 15 / 20 / 25 KHz 1 MHz |
||
| Mode: | FM | ||
| Channels/memory management: | 20 regular 2 scan edge 1 call Lithium backup battery |
||
| Repeater shift/offset: | ±0-10 MHz in 25 KHz steps | ||
| Power supply: | 13.8 VDC ±15% | ||
| Current drain/power consumption: | RX: 500-800 mA TX: 2-6 A |
||
| Antenna impedance/connector: | 50 ohms / SO-239 (on pigtail) | ||
| Dimensions (W*H*D): | 140*40*105 mm (5.5*1.6*4.1") | ||
| Weight: | 750 gr (1.7 lbs) | ||
| Other features: | Built-in CTCSS/PL encoder, RF attenuator, AF tone hi/lo | ||
| RECEIVER SECTION | |||
| Receiver system: | Double conversion superheterodyne 1st IF: 17.2 MHz 2nd IF: 455 KHz |
||
| Sensitivity: | 0.16 uV (12 dB SINAD) | ||
| Selectivity: | |||
| Image rejection: | |||
| AF output power/speaker: | 2.4 W at 10% distortion / 8 ohms | ||
| External speaker connector: | 3.5 mm, 8 ohms | ||
| TRANSMITTER SECTION | |||
| RF output power: | Hi: 25 W Lo3: 10 W Lo2: 5 W Lo1: 1 W |
||
| Modulation system: | Variable reactance | ||
| Max FM deviation: | ±5 KHz | ||
| Spurious emissions: | Less than -60 dB | ||
| Microphone impedance/connector: | 600 ohms / 8-pin | ||
| MISCELLANEOUS | |||
| Manufactured: | Japan, 1990-199x (Discontinued) | ||
| Additional info: | PLL IC: PLL2001 | ||
| Related documents: | User manual (3.3 MB) | ||
| Modifications: | |||
| Options/Accessories: |
|
Yorum Yapmak İsteyebilirsiniz