The Kenwood R-300 is a dual conversion receiver covering 170 kHz to 30 MHz in AM and SSB. Features include: ¼ inch headphone jack, S-Meter, bandspread, ANL, antenna trimmer, 500 kHz crystal calibrator, BFO, dial lamp, tone switch, carry handle, RF gain and record jack. The bandspread includes the amateur bands plus the major shortwave broadcast bands. Wide or narrow selectivity may be selected (5.0/2.5 kHz @-6dB). All the controls are easy to use. The rear panel has an external speaker jack plus both antenna terminals and an SO239 antenna jack.
117/220 VAC or 12-15 VDC or eight D cells. 14.25 x 6.4 x 12.8 inches 17 lbs.
| Type: | HF receiver |
| Frequency range: | 0.17-30 MHz |
| Mode: | AM/SSB/CW |
| Receiver system: | |
| Sensitivity: | |
| Selectivity: | |
| Image rejection: | |
| Voltage: | 13.8 VDC, mains or 8 x LR20 |
| Current drain: | ? mA |
| Impedance: | 50 ohms / SO-239 |
| Dimensions (W*H*D): | ? mm |
| Weight: | ? Kg |
| Manufactured: | Japan, 1976-1979 (Discontinued) |
| Other: | This is basically an updated QR-666 with a new front panel |
| Related documents: | |
| Modifications: |
Yorum Yapmak İsteyebilirsiniz