Kenwood TR-9500 2 meter multimode transceiver provides 2 meter operation in FM, LSB, USB and CW modes. Power output may be selected at 1 watt (FM/CW) or 10 watts (FM/SSB/CW). Frequency coverage is 143.9-148.9999 MHz. Enhancements include: RF gain, RIT, S/RF meter, all-mode squelch and 5 memories.
Both memory scan and band scan are supported. Requires 13.8VDC at 2.9 Amps. 6.8 x 2.7 x 9.6 inches 5.5 lbs. Includes mobile mounting bracket, DC cord and up-down hand mic. An impressive base system configuration can be had with the addition of the optional SP-120 speaker, PS-20 power supply and BO-9 system base. With up-down hand mic.
The Kenwood TR-9500 is similar, but operates on 70 cm (430-440 MHz) instead of 2 meters.
Type: | Amateur UHF transceiver | ||
Frequency range: | 430-440 MHz | ||
Tuning steps: | FM: 1 / 5 / 25 KHz SSB: 100 Hz / 10 KHz |
||
Mode: | FM/SSB/CW | ||
Channels/memory management: | 6 regular (memory 6 can also store split frequencies) RAM storage, external voltage required for retention |
||
Repeater shift/offset: | -1.6 and -7.6 MHz | ||
Power supply: | 13.8 VDC ±15% | ||
Current drain/power consumption: | RX: 700 mA (no signal) + 2 mA for memory backup TX: Max 3.8 A |
||
Antenna impedance/connector: | 50 ohms / SO-239 | ||
Dimensions (W*H*D): | 170*68*241 mm (6.69*2.68*9.49") | ||
Weight: | 2.7 Kg (5.94 lbs) | ||
Other features: | NB. 1750 Hz repeater tone | ||
RECEIVER SECTION | |||
Receiver system: | Double conversion superheterodyne 1st IF: 21.6 MHz 2nd IF: 455 KHz (FM), 8.83 MHz (SSB/CW) |
||
Sensitivity: | FM: 0.25 uV (12 dB SINAD) SSB/CW: 0.5 uV (20 dB S/N) |
||
Selectivity: | FM: 14 KHz (-6 dB), 20 KHz (-60 dB) SSB/CW: 2.4 KHz (-6 dB), 4.8 KHz (-60 dB) |
||
Image rejection: | |||
AF output power/speaker: | 2 W at 10% distortion / 8 ohms | ||
External speaker connector: | 3.5 mm | ||
TRANSMITTER SECTION | |||
RF output power: | Max 10 W | ||
Modulation system: | FM: Variable reactance direct shift SSB: Balanced |
||
FM deviation: | ±5 KHz | ||
Spurious emissions: | Less than -60 dB | ||
Microphone impedance/connector: | 500 ohms / 6-pin | ||
MISCELLANEOUS | |||
Manufactured: | Japan, 1980-198x (Discontinued) | ||
Additional info: | |||
Related documents: | User Manual (3.7 MB) | ||
Modifications: | |||
Options/Accessories: |
|
Yorum Yapmak İsteyebilirsiniz