Kenwood TR-7200 Mobile Radio

Kenwood TR-7200 is a 2 meter mobile FM transceiver. It can operate within a 2 MHz range 144-148 MHz (factory default is 146-148 MHz). The supplied T/R channel pairs are: 146.94/146.94, 146.34/146.94, 146.52/146.52, 146.16/146.76, 146.22/146.82, 146.28/146.88 MHz. It has 6 built-in channels and has a total capacity of 22 channels. 

A priority button on the front panel takes you to your priority channel directly. Power output may be selected to 10 watts "High" or 1 watt "Low". The rear panel features an SO239 antenna jack, speaker jack, tone jack and Aux connector. The power requirement is 3 Amps at 13.8 VDC. It comes with a 4 pin hand mic. 7.125 x 2.375 x 9.875 inches.

GENERAL
Type:	Amateur VHF transceiver
Frequency range:	144-146 MHz
Tuning steps:	-
Mode:	FM
Channels/memory management:	23 channels. XTAL
Repeater shift/offset:	Depending on XTALs
Power supply:	11.5-16 VDC
Current drain/power consumption:	RX: 400 mA (no input) TX: 1.2-2.7 A
Antenna impedance/connector:	50 ohms / SO-239
Dimensions (W*H*D):	180*60*240 mm (7.1*2.4*9.45")
Weight:	2.5 Kg (5.5 lbs)
Other features:
RECEIVER SECTION
Receiver system:	Double conversion superheterodyne 1st IF: 10.7 MHz 2nd IF: 455 KHz
Sensitivity:	1 uV (26 dB S/N)
Selectivity:	20 KHz (-6 dB), 40 KHz (-60 dB)
Image rejection:	60 dB
AF output power/speaker:	1 W at 10% distortion / 8 ohms
External speaker connector:	3.5 mm, 4-8 ohms
TRANSMITTER SECTION
RF output power:	Hi: 10 W Lo: 1 W
Modulation system:	Variable reactance phase shift
Max FM deviation:	±15 KHz
Spurious emissions:	Less than -60 dB
Microphone impedance/connector:	500 ohms / 4-pin
MISCELLANEOUS
Manufactured:	Japan, 197x-197x (Discontinued)
Additional info:
Related documents:	User manual (5.6 MB)
Modifications:
Options/Accessories:	PS-5 Power supply with built-in clock and timer