Kenwood TR-7200 is a 2 meter mobile FM transceiver. It can operate within a 2 MHz range 144-148 MHz (factory default is 146-148 MHz). The supplied T/R channel pairs are: 146.94/146.94, 146.34/146.94, 146.52/146.52, 146.16/146.76, 146.22/146.82, 146.28/146.88 MHz. It has 6 built-in channels and has a total capacity of 22 channels.
A priority button on the front panel takes you to your priority channel directly. Power output may be selected to 10 watts "High" or 1 watt "Low". The rear panel features an SO239 antenna jack, speaker jack, tone jack and Aux connector. The power requirement is 3 Amps at 13.8 VDC. It comes with a 4 pin hand mic. 7.125 x 2.375 x 9.875 inches.
GENERAL | |||
Type: | Amateur VHF transceiver | ||
Frequency range: | 144-146 MHz | ||
Tuning steps: | - | ||
Mode: | FM | ||
Channels/memory management: | 23 channels. XTAL | ||
Repeater shift/offset: | Depending on XTALs | ||
Power supply: | 11.5-16 VDC | ||
Current drain/power consumption: | RX: 400 mA (no input) TX: 1.2-2.7 A |
||
Antenna impedance/connector: | 50 ohms / SO-239 | ||
Dimensions (W*H*D): | 180*60*240 mm (7.1*2.4*9.45") | ||
Weight: | 2.5 Kg (5.5 lbs) | ||
Other features: | |||
RECEIVER SECTION | |||
Receiver system: | Double conversion superheterodyne 1st IF: 10.7 MHz 2nd IF: 455 KHz |
||
Sensitivity: | 1 uV (26 dB S/N) | ||
Selectivity: | 20 KHz (-6 dB), 40 KHz (-60 dB) | ||
Image rejection: | 60 dB | ||
AF output power/speaker: | 1 W at 10% distortion / 8 ohms | ||
External speaker connector: | 3.5 mm, 4-8 ohms | ||
TRANSMITTER SECTION | |||
RF output power: | Hi: 10 W Lo: 1 W |
||
Modulation system: | Variable reactance phase shift | ||
Max FM deviation: | ±15 KHz | ||
Spurious emissions: | Less than -60 dB | ||
Microphone impedance/connector: | 500 ohms / 4-pin | ||
MISCELLANEOUS | |||
Manufactured: | Japan, 197x-197x (Discontinued) | ||
Additional info: | |||
Related documents: | User manual (5.6 MB) | ||
Modifications: | |||
Options/Accessories: |
|
Yorum Yapmak İsteyebilirsiniz