The Kenwood R-600 is a multi-mode receiver covering 150 kHz to 30 MHz in thirty 1 MHz bands with 1 kHz digital display resolution. Simplicity is the keystone of the R-600. Refinements include: S-Meter, Wide-Narrow Selectivity, Record Jack, Noise Blanker, Attenuator and tone control. The input voltage may be set for 100, 120, 220 or 240 volts AC.
There is a carry handle on the right side. The rear panel has antenna inputs for coaxial or hi-Z wire antennas. 120/240 VAC. UL listed. (The R-600 replaced the R-300).
Type: | HF receiver | ||
Frequency range: | 0.15-30 MHz | ||
Tuning steps: | Continuous | ||
Mode: | AM/SSB/CW | ||
Channels/memory management: | No | ||
Power supply: | Mains: 100 / 120 / 220 / 240 VAC (13.8 VDC option) | ||
Current drain/power consumption: | 16 W | ||
Antenna impedance/connector: | 50 ohms / SO-239 or spring terminals 500 ohms / Spring terminals |
||
Dimensions (W*H*D): | 299*110*200 mm (11.77*4.33*7.87") | ||
Weight: | 4.5 Kg (9.9 lbs) | ||
Other features: | 20 dB attenuator. NB. | ||
RECEIVER SECTION | |||
Receiver system: | Triple conversion superheterodyne 1st IF: 40.455 MHz 2nd IF: 10.455 MHz 3rd IF: 455 KHz |
||
Sensitivity: |
AM-N (0.15-2 MHz): 50 uV (10 dB S/N) AM-N (2-30 MHz): 5 uV (10 dB S/N) SSB (0.15-2 MHz): 5 uV (10 dB S/N) SSB (2-30 MHz): 0.5 uV (10 dB S/N) |
||
Selectivity: |
AM Narrow: 2.7 KHz (-6 dB), 5 KHz (-50 dB) AM Wide: 6 KHz (-6 dB), 18 KHz (-50 dB) SSB/CW: 2.7 KHz (-6 dB), 5 KHz (-50 dB) |
||
Image rejection: | |||
AF output power/speaker: | 1.5 W at 10% distortion / 8 ohms | ||
External speaker connector: | 3.5 mm, 4-16 ohms | ||
MISCELLANEOUS | |||
Manufactured: | Japan, 1982-1985 (Discontinued) | ||
Additional info: | New price december 1985 in Sweden: 3368:- SEK | ||
Related documents: |
User manual (1.7 MB, in english/german/french/spanish) Service manual (3.6 MB) |
||
Modifications: | |||
Options/Accessories: |
|
Order # | Item | Description | Price | Order |
---|---|---|---|---|
DCK-1 | DC power cable kit. INFO | Discontinued |
Yorum Yapmak İsteyebilirsiniz