The Icom IC-2100H 25N 2 meter FM mobile features a rugged design and an easy-to-read alphanumeric display. The displays may be set to green or amber. The receiver covers 136-174 MHz and the transmitter delivers 55, 10 or 5 watts of output. The improved receive IMD helps provide protection from excessively strong signals such as pager signals. And the squelch attenuator (approx 10 dB) allows you to reduce interference from strong nearby signals. A winning combination for receive performance. The oversized tuning dial is easy to grab while on the move and the large 4-level backlit display clearly provides key information at a glance. Memory channels can be assigned names for easy recognition and easy access. The 2100H supports three different scan modes: Full Scan, Memory Scan, Programmed Scan and five scan resume conditions.
| Type: | Amateur VHF transceiver | ||
| Frequency range: | TX: 144-146 MHz (Europe) TX: 144-148 MHz (USA) RX: 136-174 MHz (5 / 10 / 12.5 / 15 / 20 / 25 / 30 / 50 KHz steps) |
||
| Mode: | FM (USA) FM/NFM (Europe) |
||
| RF Power output: | Hi: 55 W Mid: 10 W Lo: 5 W |
||
| Receiver system: | Double conversion superheterodyne 1st IF: 15.65 MHz 2nd IF: 450 KHz |
||
| Sensitivity: | 0.18 uV (12 dB SINAD) | ||
| Selectivity: | FM: 12 KHz (-6 dB), 28 KHz (-60 dB) NFM: 6 KHz (-6 dB), 18 KHz (-60 dB) Europe only |
||
| Image rejection: | 60 dB | ||
| Voltage: | 13.8 VDC +/- 15% | ||
| Current drain: | RX: 0.8-1 A TX: 3.5-12 A |
||
| Impedance: | 50 ohms, SO-239 | ||
| Dimensions (H*W*D): | 140*40*180 mm | ||
| Weight: | 1.2 Kg | ||
| Manufactured: | Japan, 1997-199x (Discontinued) | ||
| Other: | 100 + 13 memories. CTCSS/PL, DTMF memory | ||
| Related documents: | User manual (769 KB) Service manual (3.4 MB) |
||
| Modifications: | |||
| Options/Accessories: |
|
Yorum Yapmak İsteyebilirsiniz