 | The Icom IC-2E is similar to the Icom IC-2AT, but without the DTMF encode keypad. Operation is from 144-447.995 MHz in 5 kHz steps. Power output is 1.5W (at 8.4 VDC) or 0.15 W low. The IC-2A uses the same accessories as the IC-2AT series.The European version Icom IC-2E is similar to the IC-2A, but operates from 144-445.995 MHz. |
| Type: | Amateur VHF transceiver |
| Frequency range: | 144-146 MHz (5 KHz steps) |
| Mode: | FM (15 KHz BW) |
| RF Power output: | Hi: 1.5 W @ 8.4 VDC Lo: 150 mW @ 8.4 VDC |
| Receiver system: | Dual conversion superheterodyne 1st IF: 10.695 MHz 2nd IF: 455 KHz |
| Sensitivity: | N/A |
| Selectivity: | 15 KHz (-6 dB), 30 KHz (-60 dB) |
| Image rejection: | >60 dB |
| Voltage: | 8.4 VDC (6-16 VDC with attendant battery pack BP3) |
| Current drain: | RX: 20-130 mA TX: 220-550 mA |
| Impedance: | 50 ohms, BNC |
| Dimensions (W*H*D): | 65*167*35 mm |
| Weight: | 450 gr (battery and antenna included) |
| Manufactured: | Japan, 1980-1990 (Discontinued) |
| Other: | 1750 Hz tone burst |
| Related documents: | User manual (3.2 MB), Service manual (7.7 MB) FM-IF: MC3357P |
| Modifications: |
Yorum Yapmak İsteyebilirsiniz