LSS OEM Surround Dampening/Sealing Treatment - 1 Ounce - ClearThis is the same OEM Surround Dampening/Sealing Treatment used by many Major Manufacturers. Specially formulated for sealing Surrounds to prevent out of phase leakage (cavitation) off the back of the Cone, extend the life of the Surround, and dampen the action.
1 oz. of LSS Clear OEM Surround Dampening/Sealing Treatment will treat two 18" Surrounds. Actual coverage will vary depending on application techniques and amounts applied.
Tacks within 5 minutes and 24 hours usually guarantees a complete cure. Curing times vary depending on application techniques. Clean-up is easy using water!
Not an adhesive. LSS Clear OEM Surround Dampening/Sealing Treatment is used only to treat Surrounds. Store in a cool, dark, dry place to increase shelf life and prevent thickening of opened containers. BAS MİD HOPARLOR KENAR YAPISTIRICI
LSS OEM Black Speaker Adhesive™ - 1 Oz.Get the professional results you want!! This is the same Black Adhesive used by many Major Manufacturers.
LSS OEM Black Adhesive™ is mainly used for bonding the Dust Cap to the Cone and strain relief where the Spider Wires penetrate the cone. It's used exclusively for the whole build by some Manufacturers.
Acetone based; clean-up requires either Acetone or MEK. We use MEK not only for clean-up, but also for thinning when necessary as the results are very desirable.
Curing times vary depending on the application and amount applied. 24 hours guarantees a complete cure. Store in a cool, dark, dry place to increase shelf life and prevent thickening of opened containers. Thin with MEK or Acetone if it thickens up. MEK works the best.
Also available in 8 Oz. and 1 Gallon containers.BAS MID HOPAROR SARIM YAPISTIRICI
LSS OEM Black Speaker Adhesive™ - 1 GallonGet the professional results you want!! This is the same Black Adhesive used by Major Manufacturers. LSS OEM Black Adhesive™ is mainly used for bonding the Dust Cap to the Cone & strain relief where the Spider Wires penetrate the Cone. It is used exclusively for the whole build by some Manufacturers.
Acetone based; clean-up requires either Acetone or MEK. We use MEK not only for clean-up, but also for thinning when necessary as the results are very desirable. Curing times vary depending on the application and amount applied. 24 hours guarantees a complete cure.
Store in a cool, dark, dry place to increase shelf life and prevent thickening of opened containers. Thin with MEK or Acetone if it thickens up. MEK works the best.
Also available in 1 oz. and 8 Oz.
LSS Medium Cyanoacrylate Voice Coil Adhesive - 1/2 Oz.Use for bonding the Voice Coil to the Cone and Spider. LSS OEM Voice Coil Adhesive™ can endure the high temperatures Voice Coils generate when being pushed hard!
LSS OEM Voice Coil Adhesives™ are specially formulated for the Speaker Industry and designed for high-temperature applications.
All Cyanoacrylates are not the same. You can't get this at WalMart, but it does have a million other uses.
Don't forget LSS Accelerator to guarantee a rapid, complete cure. Cyanoacrylate will slowly cure without using accellerator, but it's been proven that hi-temp bonds made with Accelerator are stronger than those without it.BOBİN YAPISTIRICI
BAS HOPARLOR SARIM YAPISTIRICI
Yorum Yapmak İsteyebilirsiniz