Icom IC-761 is designed for advanced amateur operations from 160 to 10 meters. It features a high performance 100 kHz to 30 MHz general coverage receiver built in. Output is 10 to 100 watts SSB/CW/RTTY modes (10 to 40 watts AM). The 761 has sophisticated capabilities such as: dual digital VFOs, all-mode squelch, keypad entry Notch, Passband Tuning, RIT/XIT, pre-amp and 20 dB attenuator. You also get 32 memories. The two color fluorescent digital display is easy to read.
Three quality filters are already installed: FL44 SSB 2.4 kHz, FL52A CW 500 Hz and FL32A CW 500 Hz (9 MHz IF). The Icom CR-64 high stability crystal oscillator is already installed. Serious CW operators will appreciate the built-in electronic keyer, full and semi break-in capability. The rear panel has an SO-239 antenna jack plus a receive only RCA phono jack. The 761 has a built in antenna tuner and operates from 120 VAC via a built-in power supply. 16.7 x 5.9 x 15.4 inches (424x150x390mm).
| Type: | Amateur HF transceiver |
| Frequency range: | TX: 10-160 m + WARC RX: 0.1-30 MHz |
| Mode: | AM/FM/SSB/CW |
| RF Power output: | 10-100 W |
| Receiver system: | N/A |
| Sensitivity: | N/A |
| Selectivity: | N/A |
| Image rejection: | N/A |
| Voltage: | 13.8 VDC or mains |
| Current drain: | RX: ? mA TX: Max ? A |
| Impedance: | 50 ohms, SO-239 |
| Dimensions (W*H*D): | 424*150*390 mm |
| Weight: | ? Kg |
| Manufactured: | Japan, 1987-1989 (Discontinued) |
| Other: | Built-in auto-AT. RS-232C New price 1988 in Sweden: 26950:- SEK |
| Related documents: | User manual (5.5 MB) |
| Modifications: | |
| Options/Accessories: |
Yorum Yapmak İsteyebilirsiniz