The Icom IC-202 is a portable 2 meter SSB transceiver. Operation is from 144-144.4 MHz continuous via two supplied crystals. Two additional crystal sockets are available for 200 kHz segments in the range of 144-145 MHz. Output is 3 watts SSB. An external key jack supports CW operation. May be operated from nine "C" cells or external 13.8 VDC. Has accurate 10 kHz linear analog dial scale. There is both a built-in telescopic whip and an SO-239 external antenna jack.
Initially supplied accessories included: hand mic, case, nine "C" cells, shoulder strap and earphone.
Operational Note: Some versions used a positive ground and negative tip. Therefore operation in a vehicle is not advised.
The Icom IC-402 (not shown) is similar to the IC-202, but operates on 70 cm in the range of 430-435.2 MHz 3W SSB/CW.
The Icom IC-502 (not shown) is similar to the IC-202, but operates on 6 meters from 50-52 MHz 3W SSB/CW.
The Icom IC-502A (not shown) is similar to the IC-202, but operates on 6 meters from 50-51 MHz 3W SSB/CW.
This updated version [1980] of the IC-502 features smoother tuning and better stability.
| Type: | Amateur VHF transceiver |
| Frequency range: | 144-146 MHz (VXO 200 KHz segments depending on crystals) |
| Mode: | USB/CW |
| RF Power output: | CW: 3 W USB: 3 W (PEP) |
| Receiver system: | Single conversion superheterodyne IF: 10.7 MHz |
| Sensitivity: | 0.5 uV ((S+N)/N 10 dB or better |
| Selectivity: | 2.4 KHz (-6 dB), 4.8 KHz (-60 dB) |
| Image rejection: | N/A |
| Voltage: | 13.8 VDC +/-15% |
| Current drain: | RX: 90-250 mA TX: Max 750 mA |
| Impedance: | 50 ohms, SO-239 or built-in telescopic whip |
| Dimensions (W*H*D): | 61*183*162 mm |
| Weight: | 2 Kg (With batteries) |
| Manufactured: | Japan, 1976-197x (Discontinued) |
| Other: | NB, RIT. External VFO option New price 1976 in Sweden: 1780:- SEK |
| Related documents: | User manual (15.1 MB) |
| Modifications: |
Yorum Yapmak İsteyebilirsiniz